Environmental Test Equipments

Product Details:

1 Low Noise Operations
2 Brushless Blower
3 Portable For Easy Transportation
4 Controlled Flow
5 SPM Of Particle Size Less Than 100 Microns6 RSPM Of Particle Size Less Than 10 Microns Technical Specification flow Rate 0.8 To 1.5 M3/Min Particle Size Up To 10 Micron Collected On Filter And SPM Bigger han 10 Micron Collected In A Separate Collector Cup Blower Continuous Duty Blower With Brushless Blower Recommended Filter GF/A(8” X 10”) For Common Use, EPM 2000For Special Research Or Equivalent Time Record 0 To 9999.99 Hrs. Time Totalizer Records The Running Time In Hours Timer 24 Hr Programmable Timer Power Requirement 220 Volts, Single Phase AC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Parameter
pH
mV
Conductivity
TDS
Salinity
Temp.
DO
Range
 0  to 
14 pH 
0   to ± 1999mV
0.00 uS/cm to 1000 mS/ cm  .
Auto ranging
0 to
1000 ppt 
Auto ranging
   0   to
 50 ppt. 
Auto ranging
0°C
 to 100°C 
0 to 20ppm 
 
Resolution
 0.01pH
1 mV
0.01uS
0.1ppm
0.1ppt
0.1°C
0.1ppm
Accuracy
±0.01pH
±1 digit
±0.1%
±1 digit
± 0.5% of range±1 digit.
 
±  0.5 % of range
±1
digit.
±0.5% of range
 ±1 digit.
± 0.2%  of
range +1 digit
±0.3% of range +1digit
 
Calibration
For pH 2/ 3 point Auto & manual. For other s parameter  manual
 
Pressure Compensation
For DO only : 0 to 999mm of Hg ( Manual). Salinity Correction : 0 to 20 mg/litre
Temp.
Compensation
     0-100°C by default 100%, automatic with temperature probe / manual with keys
Auto Buffer Recognition
4.00 pH , 7.00 pH , 9.20pH
TDS Factor
0.50  By default) & adjustable manually.
Salinity  Factor
0.75 By default) & adjustable manually.
 
Temp. coefficient Adjustment:            
                 0.00% to 4.00% . By default 2.00%.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Delivery Time: 7 days

High Volume Sampler
Specifications- Flow rate : 0.8 to 1.5 m3/min- Particle Size : Upto 10 micron collected on filter and SPM biggerthan 10 micron collected in a separate cup- Blower : Continuous duty blower with brushless Blower- Recommended filter : GF/A (8” X 10”) for common use, EPM 2000for Special Research or equivalent- Time Record : 0 to 99999.99 hrs.Time totalizer records the running time in hours- Timer : 24 Hr programmable timer- Power requirement : 220 Volts, Single phase AC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Minimum Order Quantity: 1 Piece

Product Details:

Battery operated pump for a full of 8 hrs.Rechargeable Maintenance Free Battery ALE Provision for system to operated for the main also Suction Pump : Diaphragm Type.Sampling Rate : 0.5 – 1LPMRotameter : 0-3 lpm wit Needle Valves to control flow.Digital Timer : 3 digit display in minutes with provision of display of total run Time & delay time Battery : Rechargeable maintenance free battery Running Time : 1-999Min.Delay Time : 1-99 Mint.Operation Time : 8 hours with full charge,Charge time : 15 hours or less.Sampling Train : Consisting of 2 nos., 35 ml glass impinge kept in ice tray Connected with inert Silicone tubing.Power Supply : 220v (+/-)10 V AC, 50Hs with Battery charger & rechargeable Battery (4AH).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Stack Temp Range: Ambient to 600 deg C on a Digital Pyrometer. Stack Velocity Range: 3 to 60 m/sec Thermocouple: T/C sensor in SS 304 casing, length of insertion: 0.6 m with 2m long cable. Manometer: Digital with 01300 mm of H2O range Pitot Tube: Calibrated S type fabricated SS 304, 0.6m extendable to 1.2m Particulate Sampling: 2 -30 lpm collection on thimble type filter up to 0.3 micron rating. Gaseous Sampling: 0.2 - 3 lpm collection in a set of Borosilicate glass impingers. Rota meter: Plastic body with 2% FSD accuracy, 0 - 30 lpm for PM and 03 lpm for GAS. Sampling Probe : Made from SS 304 tube, 0.6 m length extendable to 1.2 m. Filter Holder : Fabricated from SS 304 tube suitable to hold either cellulose filtration Thimble (size 28mm lD X 100mm long) or glass micro fibre thimble (size 19mm lD X 90mm long). Nozzles: A set of 3 stainless steel nozzles. Digital Clock: 0-60 minutes, 1 second readout with start and stop switches.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Flue Gas Analyzer IncludingE-4500O2 Sensor 0 To 25 %Co Sensor 0 To 8000 Ppm**With Auto-Range Up To 10%No Sensor 0 To 5000 PpmNo2 Sensor 0 To 5000 PpmCo2 Calculated 0 To 99.9 %Flue Gas & Air Temperature Measurement Draft & Differential Pressure Measurement Efficiency, Losses, & Excess Air Calculations 300mm Probe, 800oc Max, With 3m Dual Hose External Water Trap With Filter Cartridge Internal Memory, 2000 Tests Built-In Printer With Non-Fading Paper Rubber Holster With Magnetic SupportAutomatic Periodic Data Saving Software Package W/Bluetooth & Usb Cable Abs Hard Plastic Carrying CaseFull Color Graphic Display ScreenRecommended Spare Consumable Parts:Filter Cartridges (Pack Of Five)Non-Fading Paper Rolls (Pack Of Ten)Optional Accessories:3m Dual Hose ExtensionScu (Sample Conditioning Unit)Differential Pressure Hose Kit

Additional Information:

• Item Code: E4500
• Pay Mode Terms: T/T (Bank Transfer)

Fine Perticulate Sampler
AI-FPS233
Particle Size: Omni-directional air inlet with PM 10 separation through animpactor Followed by PM 2.5 separations through a WINS Impactor.Sampling rate: Constant sampling rate of 1m3/hr unaffected by voltagefluctuation And Filter choking maintained by critical orifice system.Filter Media: Filter holder designed to accept any standard 47 mm diameterfilter Media.Sample Volume: Dry Gas meter records the total air volume sampled.Power Requirement: Single phase AC 220 Volts, 50 Hertz supply. SamplerUnaffected by +/- 10% fluctuation in supply voltage.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Minimum Order Quantity: 1 Piece

Product Details:

•Hand held, portable, light weight,
•Rechargeable battery operated.
•Instantaneous flow reading.
•Indoors and outdoors use.
•Variable motor speed control
•Maximum flow rate (with loading): 1 to 3 LPM.
•Filter Holder.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)