Product Details:
| Minimum Order Quantity | 1 Piece |
| Fan Type | Centrifugal Fan |
| Application | Fume Extraction, Chemical Fume |
| Mounting | Floor Mounted |
| Voltage (V) | 230V |
| Material | Stainless Steel |
| Air Flow Rate | 1.6 |
| Fan Material | PP FRP |
| Drive Type | Coupling Drive |
| Brand | AI Scientific |
| Air Volume (m3/h) | 750 |
| Frequency (Hz) | 50 |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Model No. | AI-149 |
| MOC | Mild Steel/SS304 |
| chamber material | SS 304 with FRP lining |
| work table | Granite/PP |
| Storage Cabinet size | 1600W*750D*900H mm |
| Lightning | 20W LeD light |
| Suction Rate | 1200 cfm |
| Sash Handle | Anodized Aluminum handle |
| Casing and Coupling Material | FRP Bisphenol |
| Face Velocity | 110 fpm |
| Baffle | 10 mm thick SS made |
| Scrubber Flow rate | 3500 cfm |
| Mist Eliminator | polypropylene |
| Certificate | CE&ISO |
| Fume hood size | 3*2*2/4*2*2/5*2*2 (as per OEM) |
The Fume Hood should be chemical and heat resistant and Non-Corrosive. It should be designed as per NABL norms strictly and should be completely noiseless and vibration free . It must be completely leak proof and must maintain a negative pressure inside the chamber. It should be designed for distillation and high temperature reaction involving acid.
Inner Dimension (mm) - 1550 (L) x 750 (D) x 610 (H)
M.O.C – Outer material chemical resistant metallic GI / MS with multi layer powder coating (SS 304 OPTIONAL). The interior must have minimum 3 layers explosion proof lining, resistant to extremely toxic and corrosive fumes as well as heat & flame resistant. All corners & edges of the fume hood must be leak proof.
The work top the fume hood inside the chamber must be heat & chemical resistant Granite/PP 20mm with skirting on all side to avoid skirting.
Sash: Full View, Chemical and leak proof 8 mm Toughened Glass panel with shutter and vertical sliding glass. The bottom panel of the sash should have gasket. It must provide facility to hang litmus paper to test leakage and the air contamination.
Type of Fume Hood: Floor Model
Auxiliary socket: 15/5 Amps two on each side
Auxiliary fitting: Gas/Vacuum/ Water control Valve and made up of Non reactive material.
Sink: Sink with connections, control Valve and made up of Non reactive material.
Duct: Complete FRP.
Exhaust System: Exhaust blower/ motor assembly of 1.5 HP, The motor housing & the impeller must be either Teflon Coated or FRP.
Switch for exhaust fan: Yes.
Light: Fluorescent + Switch.
Earthing required: Yes (Needed)
The system must have Display of humidity & temperature & air velocity (m/s) with alarm at variation in air velocity.
Exhaust system: Noise/sound free high capacity blower with minimum 1.5HP 3phase, Blower Motor with suitable fitting and ducting to the roof top.
The system should be complete in all respect with FRP ducting. Complete installation including ducting shall be within the scope of supplier.
Additional Information:
